System Overview

Control

Element 2

Power

Breakers 1B, 5, and 7 to the left of the booth.

Breaker 5 is the bottom outlet on each of the four pillars around the center house seating.

Breaker 7 is the top outlet on each of the four pillars around the center house seating.

Breaker 2B powers the entire lighting booth and the house lights.

Distribution

Circuit 5 powers the majority of the LEDs in the house.

Circuit 1B is the upstage outlets behind the cyc, and one half of the upstage dimmer box.

Circuit 7 powers both halfs of the downstage breaker box.

Circuit 2B powers half of the upstage breaker box. THIS CIRCUIT SHOULD NOT BE TURNED OFF.

Data

DMX

DMX has two seperate runs from the light board for partial redundancy. Both ports are the same universe and can be used interchangeably.

sACN/Networking

A network switch is temporarily on loan from Mapletwine Lighting, located in the lighting booth. This switch is connected to the console, and to the sACN network.

There is an sACN node running on a raspberry pi attached to the networking switch. This is related to the Relay control system located within the theatre.

Wireless control

There is an attached Wireless Access Point which can be used to connect to the light board via the ETC mobile app. The SSID is Mapletwine LX and the password is controllight39.